Feature Requests
Title Block - Last Wire Number & Last Terminal Number ?

Hi Guys,

Can I request a feature ( If not already available? )

On our drawings we like to add the last used wire number and also the last used terminal number to the Title block to aid anyone modifying the control panel in the future.

Is this possible to add a dynamic field within the Title Block to show these values??

Many thanks,

Ian.

Hi Guys, Can I request a feature ( If not already available? ) On our drawings we like to add the last used wire number and also the last used terminal number to the Title block to aid anyone modifying the control panel in the future. Is this possible to add a dynamic field within the Title Block to show these values?? Many thanks, Ian.

Hi Ian,

Please allow us to clarify, do you mean you need a title block data to show the last added/modified wire name or terminal name? If yes, we are unable to add this field in the Title Block at the current moment. We would like to get more information so that we could understand your request better:

Wire name
If the drawing consists of the wires R1, R3, R4, and R5, after adding R2 wire, which wire name do you want to be recognized as the last wire name? R2 or R5?
If you want to know R5, you could double click on a wire and check the wire name from the Existing wire names list:
5fcdc7800f865

If you want to know R2, unfortunately we are unable to get this information. Reason being, Electra will need to keep tracking each and every wire name that you have modified or added and this will reduce the performance.

Terminal name
We strongly recommend you to put all the terminal blocks and terminal lists in one page so that you could see all of them and know which one is the last used number.

Thanks in advance.

Hi Ian, Please allow us to clarify, do you mean you need a title block data to show the last added/modified wire name or terminal name? If yes, we are unable to add this field in the Title Block at the current moment. We would like to get more information so that we could understand your request better: **Wire name** If the drawing consists of the wires R1, R3, R4, and R5, after adding R2 wire, which wire name do you want to be recognized as the last wire name? R2 or R5? If you want to know R5, you could double click on a wire and check the wire name from the Existing wire names list: ![5fcdc7800f865](serve/attachment&path=5fcdc7800f865) If you want to know R2, unfortunately we are unable to get this information. Reason being, Electra will need to keep tracking each and every wire name that you have modified or added and this will reduce the performance. **Terminal name** We strongly recommend you to put all the terminal blocks and terminal lists in one page so that you could see all of them and know which one is the last used number. Thanks in advance.
33
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft